TIME-SERT® GENERAL MOTORS PROFESSIONAL THREAD REPAIR KITS
NORTHSTAR HEAD BOLT REPAIR KIT
TIME-SERT® KITS HAVE BEEN TESTED AND APPROVED BY GENERAL MOTORS.
There is no other company approved for these repairs in aluminum blocks.
USE A “BIG-SERT OVERSIZED” IF THE BLOCK WAS PREVIOUSLY HELICOILED
NOTE: A good thread repair practice is to always verify the hole depths before drilling.
We recommend a Tap Wrench for tapping and driver tools.
If you need new head bolts or torque specifications contact the experts at ARP (800) 826-3045
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
2015
LS9
Head bolt
M12x1.75
M12x1.75 Headbolt
Used in 2014 Corvette 6.2L V8 full-size trucks 4.3L V6, 5.3L V8, or 6.2L V8
Silverado, Sierra, Tahoe, Yukon, Escalade, Suburban
p/n EN-42385-50
p/n En-42385-58
M12x1.75x35mm
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
Northstar 2004/PV8 LH2 4.6 liter for XLR
General Motors
Cadillac & others
Northstar head bolt repair kit
M11x 2.0 Headbolt
In 2004 the NorthStar headbolt has changed to M11x2.0 thread.
cadillac northstar head gasket repair kit
p/n J-42385-2030
P/n 112030
M11x2.0x30mm
includes 10 inserts
20 required for the entire block.
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
2013
ECOTEC GEN2
2.0 LTG / 2.5 LCV
General Motors
M11x2.0 Headbolt
2.0 LTG
2013 Cadillac ATS
2013 Chevrolet Malibu
2.5 LCV
2013 Cadillac ATS
2013 Chevrolet Malibu
2014 Chevrolet Impala
p/n 9530
P/n 112030
includes 10
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
NorthStar 2000 V8
General Motors
Cadillac & others
2000 – 2003
Northstar head bolt repair kit
M11x1.5 Headbolt
This block is similar to the early
4.0/4.6 but has two thread depths, 35mm upper bank and 51mm lower bank. This is measured from top of the block to the first starting thread.
includes 10 inserts
20 required for the entire block.
Same as GM#
J-42385-507
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
Cadillac Northstar 4.0/4.6 V8
First Repair
General Motors
also
Oldsmobile Aurora
1995 -1999
2000 and up use different kit.
see below
NorthStar M11x 1.5
Headbolt V8
This block has 1 depth
for all head bolt holes.
This is measured from the top of the block to the first starting thread 35mm.
Last year for this block 1999
p/n J-42385-500
Northstar head bolt repair kit
P/n 11155
includes 10 inserts
20 required for the entire block.
Same as GM#
J-42385-507
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
Northstar 4.0/4.6 V8
General Motors
NorthStar M10x1.5
Main Bearing
p/n J-42385-300
Instructions
p/n 101522
includes 20 inserts
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
Premium V6 “PV6”
or LX5 3.5L
General Motors
PV6 M11x1.5 Head bolt
1999-2002
Oldsmobile Intrigue
2001-2002
Oldsmobile Aurora
p/n 6001
P/n 11155
includes 16 inserts
16 required for the entire block.
Same as GM#
J-42385-507
If Needing oversized for PV6, we do not have a specific kit available.
See our Universal Head Bolt BIG-SERT M11x1.5 p/n 2200BS. LINK: Universal Head bolt page.
SPECIAL KITS AND TOOLS
The 4.5 or 4.9 liter Cadillac Head bolt size M12x1.75, we do not make a specific kit for this engine block but we do offer a Universal kit M12x1.75 p/n 4900 LINK: Universal Head bolt page.
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
High-FeatureV6 3.0/3.6 liter
General Motors
M11x2.0 Headbolt
p/n 7330
P/n 112030
includes 16 inserts.
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
10X1.5 Starter Bolt
V8
P/N 1535
10X1.5 GM Aluminum block
Starter bolt repair
Starter bolt
The depth of the starter bolt hole should be 1.500″ or 38mm Deep.
Starter Bolt
P/n 1380
Kit includes: Core Drill,
tap , tap guide, Driver, 4 inserts 20mm, 4 sleeves
10153
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
3/8-16 Starter Bolt
V8
P/N 1535
3/8-16 GM cast iron block
stripped Starter bolt thread repair kit
Stripped Starter bolt
The depth of the starter bolt hole should be 1.200″ inches or 30mm Depth minimum.
Note: This kit can also repair a failed helicoil or coil style insert.
p/n 1535
Kit includes: Drill, counterbore
tap , tap guide, Driver, 4 inserts 1.00″ or 25mm in length
153501
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
BIG BLOCK CHEVY
V8
OVERSIZED
used after helicoil failure
7/16-14
Head bolt OVERSIZED
Used in cast iron blocks where the material thickness is approx 5/8 or .625 inches
7/16-14 OverSized Kit
P/n 5761E
includes: drill, counterbore, tap, tap guide, driver, 5 inserts .600 length & sealer.
57611
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
Northstar 4.0/4.6 V8
Second Repair
General Motors
Cadillac & others
cadillac northstar head gasket repair
NorthStar M11x 1.5 Headbolt
++ OVERSIZED ++
use after helicoil failure
This kit also repairs the
NorthStar 2000 blocks.
J-42385-500BS
Instructions
includes all the tools 10 inserts 2 dowels.
additional dowel
p/n J-42385-508BS
J-42385-507BS
kit includes 10 inserts
BIG-SERT UNIVERSAL HEAD BOLT ADD-ON KIT
ADD-ON KITS ONLY PROVIDE THE NECESSARY TOOLING TO CONVERT TO BIG-SERT
You must have the original kit. What is Included: Drill, Tap, Bushing, line pin, Inserts and dowels.
You will use the driver, fixture plate, bolts from the original kit to finish the repair.
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
BIG-SERT Universal ADD- ON KIT
M11x1.5
M11x1.5
Double oversized
ADD-ON
p/n J-42385-500BSAO
note:
you must have kit p/n J-42385-500 or J-42385-2000 tooling to finish repair.
J-42385-507BS
includes 10 inserts
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
L850 or ECOTEC
2.2 liter
4 cylinder
M11x1.5 Headbolt
Use kit number J-42385-500
with J-42385-871 Drill Bushing
J-42385-500 kit with
J-42385-871 Bushing
p/n 11155
Same as GM#
J-42385-507
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
INLINE 6 LL8
General Motors
approx 15mm to the first thread.
Straight 6 M11x2.0
Head bolt
2002 -2004 GMC Envoy
2002-2004 Trail blazer
p/n 4001
Instructions
P/n 112030
includes 14 inserts
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
GENENERATION III
5.7L V8 LS
General Motors
cadillac northstar head gasket repair
GEN III M11x2.0
Head bolt Repair
1997-2004 C5
Corvette base model
1998-2002 Chevrolet
Camaro Z28, SS
1998-2002 Pontiac Firebird
Formula and Trans-Am
2004 Pontiac GTO
1999-2005 Holden Commodare
as an option
1999-2005 Holden Statesman/Caprice
2001-2005
Holden Monaro
p/n J-42385-100
Instructions
P/n 112030
includes 10 inserts
20 required for the entire block.
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
GENERATION III 5.7L
V8 LS
General Motors
GEN III M10x2.0
Main Bearing
p/n J-42385-120
Instructions
p/n 102022
includes 20 inserts
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
M12x1.75
Drain plug
This kit will repair most GM aluminum drain pans.
Repairs Drain pans in:
1999-2004 CK Engine ASM V8/ LR4/4.8V,LM7/5.3T,LQ4/6.0U
2003-2005 ST1 Engine
ASM-4.3L V6/ LU3/4.3X
Kit contains: Drill, Cbore,Tap, Driver, Tapguide, 5 inserts 12mm length
p/n 1217C
Instructions
12170
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
Universal
Rocker Arm
M8x1.25 CORE KIT
The core drill included will allow a special 11.7mm length no flange insert to be installed deeper than the standard kit.
M8x1.25
kit includes:
Coredrill, tap, driver, tap guide, 5 inserts of the 11.7mm no flange.
The mechanic doing the repair will have to set the counterbore depth manually by hand.
18125117N
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
Universal Rocker Arm
M8x1.25 BIG-SERT
OverSized repair
Use after:
A helicoil has failed
The core drill included will allow a special 11.7mm length BIG-SERT insert to be installed deeper than the standard kit.
M8x1.25
kit includes:
Coredrill, tap, driver, tap guide, 5 inserts of the 11.7mm
The mechanic doing the repair will have to set the counterbore depth manually by hand.
58121
SPECIAL KITS AND TOOLS
KIT P/N
INSERT P/N
Rocker Arm
M10x1.5 CORE KIT
The core drill included will allow a 11mm length insert to be installed deeper than the standard kit.
M10x1.5
kit includes:
Coredrill, tap, driver, tap guide, 5 inserts 11mm length.
The mechanic doing the repair will have to set the counterbore depth manually by hand.
101511
If you need new head bolts or torque specifications contact the experts at ARP (800) 826-3045
cadillac northstar head gasket repair